Parks and Open Spaces

Know how your park is used, not how busy it felt.

Counts at every gate and path, hour by hour. Staff, clean and plan your park to real use.

✓
Anonymous counts only
✓
Adults and children counted
✓
Runs on its own 4G/5G
In the park now
1,284
Busiest hour
11am to 12pm
North Gate today
642
+12% on last Sunday
Gate and path counting
Zone density
Live occupancy
Adults and children
Catchment by suburb
Usage based cleaning
Year on year trends
Anonymous by default
Gate and path counting
Zone density
Live occupancy
Adults and children
Catchment by suburb
Usage based cleaning
Year on year trends
Anonymous by default
The Problem

Most park numbers are a best guess.

A survey once a year, a weekend of clicker counts or the car park. None of it holds up in a funding round.

The old way
×

One resident survey a year

×

Clicker counts on one weekend

×

Car park tallies that miss walkers

×

Stories from whoever was on shift

With Bellwether
✓

Counts every hour of every day

✓

Every gate, path and play space

✓

Adults and children counted separately

✓

Live numbers and trends in one place

Every visit you never counted is evidence you can't use.

What we count

From the suburb to the gate entry, one set of numbers.

Four kinds of evidence in one dashboard.

Footfall counters

Gates and paths

Overhead sensors count people in and out at gates, bridges and path junctions. Adults and children are counted separately.

In 642
Out 598
Children 22%
02
Density sensors

Play spaces and courts

For spaces with no gate. See how full the playground, courts and picnic lawns get, hour by hour.

03
Hansel and Gretel

Where visitors come from

See which suburbs your visitors travel from and how often they come back.

04
Pulse counters

Walkways and toilet blocks

A small, low-cost counter for walkways, footbridges and toilet blocks.

Footbridge
486 today
Peak 7am
Riverside Park, North Gate
Saturday, hour by hour
Visitors today
3,912
Peak hour
11am
Children
22%
8am
11am
2pm
5pm
7pm
Hourly visitors
Peak hour
What You See

Know the busy hours before your team is in them.

Right now, this week and this time last year, side by side.

✓

Live occupancy

How many people are in the park, or in one zone, right now.

✓

Hour by hour patterns

Average and peak for every hour, so a steady Saturday never looks like a rush.

✓

Adults and children

Separate counts, so family use shows up in your planning.

✓

Alerts when it matters

An email when a zone hits the limit you set.

Footbridge, today
486
Peak 7am
Walkers and riders, both ways.
Pulse

The small counter for paths and walkways.

Pulse is a tiny, low-cost counter for the places a park can't fit a gate. Track by track, see how your walkways are really used.

Walkways
Footbridges
Shared paths
Toilet blocks
What It Changes

Numbers that turn into decisions on Monday morning.

Where park teams put the numbers to work first.

01

Roster to real demand

Rangers and cleaners where the people are.

02

Maintenance in the quiet hours

Mow and repair when the data says nobody's there.

03

Service facilities on use

Clean toilets and empty bins after a busy weekend, not on a fixed loop.

04

Plan events and crowds

How many came, through which gate and when.

05

Prove the upgrade worked

Compare visits before and after a new playground, path or lights.

Funding and Reporting

Take a number to the funding round, not a feeling.

Capital bids, funding rounds and grant reports all ask how many people use it. Now you'll know.

✓

Year on year, so a wet winter isn't read as a failing park

✓

Before and after for every upgrade

✓

Exports for council reports and Power BI

Playground upgrade, average weekday visits
Before upgrade
410
After upgrade
560
+37%

Weekday visits in the six months after opening, against the same months a year before.

Anonymous data only
No personal identification
Privacy filters as standard
Privacy

We count people. We don't identify them.

Bellwether never stores uniquely identifiable or personal information.

In public spaces, community trust is part of the job. Privacy is where we start, not an afterthought.

Read our privacy policy
For Park Managers and Owners

Count every visitor. Plan accordingly.

Good data never lies. Bring us your current visitor numbers and we will show you what they are missing.

Getting Started

Three steps. No disruption.

We do the heavy lifting. Your park stays open throughout.

1

A short call

We walk your site plan with you and pick the gates, paths and zones to count first.

2

Install

We fit sensors where people actually move. Each runs on its own 4G/5G, so nothing touches your network.

3

Your first report

Patterns show within days and trends within weeks, in a dashboard your whole team can use.

Frequently asked questions

How do you count visitors in a park with no gates?

Counting visitors in an open park starts at the points almost everyone passes: main entrances, bridges, path junctions and facility doors. Overhead counters record people in and out at those points, and density sensors measure how many people are in open zones such as playgrounds and lawns. Together they give you a reliable picture of use without fencing anything in.

Does it work outdoors and in bad weather?

Outdoor counting is the ability to keep an accurate count in open air, through groups, shadows and changing light. Bellwether counters are built to count indoors and outdoors. Every park is different, so we confirm mounting points, power and weather exposure on a site walk before we recommend a layout.

Can we see where our visitors travel from?

Catchment reporting shows which suburbs your visitors come from. Bellwether's Hansel and Gretel uses anonymised location signals, calibrated against counts on the ground, to show where visitors travel from, how often they return and which other places they visit. It helps you decide where to promote events and which communities you are not yet reaching.

Is it watching people?

No. Bellwether is a counting system, not a surveillance system. We count people. We don't identify them. Bellwether never stores uniquely identifiable or personal information: no names, no faces, nothing that can identify anyone. Your community gets better planned spaces without being watched.

Can it tell adults and children apart?

Adult and child counting means the sensor records adults and children as separate numbers. Bellwether's overhead counters do this as standard, so you can see how much of your park's use comes from families and plan play spaces, toilets and events around it.

Will it add work for our IT team?

No. Each sensor runs independently over its own 4G/5G connection, so there is nothing to plug into your network or data ports. Data flows into one Bellwether dashboard and can feed Power BI or your own systems through our API and webhooks.

How long until we see useful data?

Useful data is the point where patterns are clear enough to act on. Most sites see daily patterns within days and meaningful trends within weeks. Install time depends on how many entrances and zones you measure, and we agree the plan with you before anyone arrives on site.

How is it priced?

Bellwether is priced per entrance, not per user, so your whole team can use the dashboard. Purchase and leasing options are available. Tell us how many entrances and zones you want to measure and we will give you a clear quote.